Crankshaft/Piston & Hardware
25 Item(s)
per page
-
Allen Bolt w. Washer (M8x18), OEM
SKU: N10055703
CA$3.50Don't risk getting stuck on a job because the old hardware is too worn, stripped, or rusty to reinstall. Out with the old, and in with the new. Learn More -
Con Rod Bearing Kit, Kolbenschmidt
SKU: 06D198481.KOL
CA$60.00Standard size big end bearing kit for unmodified connecting rods. Learn More -
Con Rod End Cap Bolt (M8x50), OEM
SKU: WHT006219
CA$7.00Connecting rod cap bolts must not be reused once removed. Learn More -
Crankshaft Bolt (M14x47), OEM
SKU: N90577101
CA$8.50Never reuse any bolt designed for one time use. Learn More -
Crankshaft Bolt (M16x54), Febi
SKU: WHT005322.FEB
CA$8.50Never reuse any bolt designed for one time use. Learn More -
Crankshaft Bolt (M16x59), OEM
SKU: WHT004573
CA$7.50Never reuse any bolt designed for one time use. Learn More -
Crankshaft Bolt (M16x75), OEM
SKU: WHT009475
CA$8.00Never reuse any bolt designed for one time use. Learn More -
Crankshaft Bolt (M18x40), OEM
SKU: N0100876
CA$8.50Never reuse any bolt designed for one time use. Learn More -
Crankshaft Position Sensor, FAE
SKU: 070907601A.FAE
CA$122.00This sensor is what tells your ECU what position your crankshaft is in. Learn More -
Crankshaft Sprocket Bolt, OEM
SKU: 078105229D
CA$19.00This is a must-have whenever the timing belt is being replaced. Learn More -
Crankshaft Timing Sprocket, Topran
SKU: 06A105263E.TOP
CA$45.00Replace worn engine timing components to avoid expensive surprises. Learn More -
Front Crankshaft Seal (45x60x8), Corteco
SKU: 06L103085B.CRT
CA$15.00Leaky crankshaft seals are a common problem, and should be replaced as soon as possible. Learn More -
Front Crankshaft Seal (45x60x8), OEM
SKU: 06L103085B
CA$33.00Leaky crankshaft seals are a common problem, and should be replaced as soon as possible. Learn More -
Front Crankshaft Seal (45x60x8), Reinz
SKU: 06L103085B.RNZ
CA$15.00Leaky crankshaft seals are a common problem, and should be replaced as soon as possible. Learn More -
Main Bearing Cap Bolt (M10x80), OEM
SKU: N90130001
CA$5.50Main bearing cap bolts must not be reused once removed. Learn More -
Main Bearing Cap Bolt (M10x80), OEM
SKU: N91118902
CA$5.00Main bearing cap bolts must not be reused once removed. Learn More -
Main Bearing Kit, Kolbenschmidt
SKU: 06B198491.KOL
CA$50.00Standard size main bearing kit for unmodified crankshafts. Learn More -
Piston (82.5mm), Kolbenschmidt
SKU: 06H107065DM.KOL
CA$220.00Standard size piston. Learn More-
This item is not currently available
-
-
-
-
Piston Ring Set (82.5mm), Mahle
SKU: 06D198151E.MAH
CA$65.00Set of 3 piston rings for standard OEM pistons. Learn More -
Piston Ring Set (82.5mm), OEM
SKU: 06D198151E
CA$140.00Set of 3 piston rings for standard OEM pistons. Learn More -
Short Block (2.0T), OEM
SKU: 06F103011J
CA$775.00Brand new bare OEM short block. Learn More-
This item is not currently available
-
-
Shouldered Allen Bolt (M8x37), OEM
SKU: N90339605
CA$4.00Don't risk getting stuck on a job because the old hardware is too worn, stripped, or rusty to reinstall. Out with the old, and in with the new. Learn More -
Thrust Washer Kit, Kolbenschmidt
SKU: 026198421.KOL
CA$18.00The thrust washers must always be replaced when replacing the crankshaft main bearings. Learn More
25 Item(s)
per page
