These 20mm Novustech hubcentric and wheelcentric adaptors are designed to work with the following vehicle wheel hub and wheel center bore combinations:

Car Center Bore:	57.1mm
Car Bolt Pattern:	5x100mm
Wheel Center Bore:	57.1mm
Wheel Bolt Pattern:	5×112mm

These adaptors come ready to install with pressed-in studs and nuts for the wheels.

VW and Audi wheels with 5x112mm bolt patterns have a centre bore of either 57.1mm or 66.6mm. If your wheels have a centre bore of 57.1mm, these adaptors are a direct fit. If your wheels have a CB of 66.6, you will need to purchase an additional set of 57.1-66.6 hub centering rings. See the drop down list below.

Cone nuts are shown in the images. Make sure to choose ball seat or cone seat wheel nuts from the drop down list below. If your wheels are OEM, then you require ball seat nuts. If they are aftermarket wheels, you will require cone seat nuts.

These adaptors mount to the wheel hubs using stock wheel bolts. The tops of the wheel bolts could potentially stick out higher than the mounting faces of the adaptors. Depending on the wheels being used, reliefs may be present that will clear the tops of the wheel bolts. If not, wheel bolts with a shorter head may need to be used. We regret that we do not currently offer this type of wheel bolt.

Please note that adaptors are priced and sold in pairs. For 1 vehicle, you will need to purchase 2 pairs.

This item is currently unavailable.