Installing your wheels can be a pain. Having to hold the wheel on the hub while putting the wheel bolt into a socket, then finding that the wheel has spun a little bit, only to find that it needs to be rotated a bit to line everything up gets old pretty quick. If you’ve got 10mm or thinner spacers, this job becomes even more frustrating. If you happen to have sheared off the brake disc set screw and now get to watch as the hub and brake disc spin independently of each other, you’re probably ready to throw something.

The Novustech M12 Wheel Hanger is just what your chiropractor ordered! Simply thread this handy tool into the wheel bolt hole at the 12 o’clock position, and install your spacer (if you have them) and wheel. Thread the remaining bolts without torquing them, remove the Wheel Hanger, install the last bolt, and torque everything to spec.

Note: depending on our suppliers' stock levels, Metalnerd or Novustech may be substituted.